I am having difficulty creating cross sections, I have my surface, profiles, alignments, corridors, sample lines, etc.
When I attempt to create the cross sections I get an error that says "FAILED OPENING FIRST SECTION LINE GROUP OF ALIGNMENT <lists alignment name>"
Please help!!!
Solved! Go to Solution.
Solved by sopendrive12. Go to Solution.
Solved by hgohel. Go to Solution.
Does an AUDIT pass on your drawing?
Examine each sample line group for the alignment - is everything OK there? If not, create (multiple) section view will give you this error.
I ran the audit and that seemed to resolve the cross section issue. Now my design corridor seems to be pinning itself to a zero elevation and most of my feature lines are spiking to zero elevations at multiple points over the featureline.
Hi,
I have had the same problem and audit did not fix this problem. So, I restarted the civil 3d drawing and then it worked fine.
Cheers,
Toufiq Rahman
hi,
i have same problem >>> i have my corridor and my sample lines , but when i do multiple cross sections ,send for me same problem and same massage ...
please help me
I was pulling my hair out and took a look at the Forum.....Thank you. Audit seemed to work in my case as well.
Had this problem on the end of a workday. Next day it was still present so a full laptop restart didn't solve the problem.
A simple Audit did work though.