Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Creating surfaces from exisiting contour map for volume calculations
Creating surfaces from exisiting contour map for volume calculations
I am working on a project, I was given a file with the contour already mapped out. I am tasked with finding volume of a fill I had to create. I made a 3-D polyline at the elevation I want my fill to start from and going down to my final grade. How can I make surfaces with my map. I do not have any files to make the surface off of. What is the easiest way I can make a layer, TIN has already been done but no surfaces are in the file.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")