AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Mentor
JamaL9722060
Posts: 1,317
Registered: ‎04-09-2010
Message 1 of 7 (557 Views)

Creating points at the stations of an alignment,

557 Views, 6 Replies
10-18-2012 01:43 PM

Creating points at the stations of an alignment,

 

I wanted to get the (x,y,z) of the stations of an alignment, but sounds not to work.

 

In the screenshots below, I got the message “The specified station is not valid for this object” and couldn’t proceed! How this issue might be solved?

 

Thank you

 

Best

 

Jamal

 

Clip_218.jpg

 

Clip_219.jpg

 

 

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
*Expert Elite*
Joe-Bouza
Posts: 4,966
Registered: ‎12-15-2008
Message 2 of 7 (532 Views)

Re: Creating points at the stations of an alignment,

10-18-2012 08:14 PM in reply to: JamaL9722060

Jamal,

 

 

 

Home>> Points >> create point along alignment. key in a value that is within the station range

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Mentor
JamaL9722060
Posts: 1,317
Registered: ‎04-09-2010
Message 3 of 7 (522 Views)

Re: Creating points at the stations of an alignment,

10-19-2012 12:52 AM in reply to: Joe-Bouza

Thank you Joe-Bouza for the help.

 

I couldn’t find the option “create point along alignment”! the screenshot is attached.

 

Clip_222.jpg

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Valued Contributor
bpoleuca
Posts: 61
Registered: ‎03-23-2007
Message 4 of 7 (518 Views)

Re: Creating points at the stations of an alignment,

10-19-2012 01:41 AM in reply to: JamaL9722060

The function DIVIDE you can use when you want a number of segments.

The function MEASURE you can use when you want to have the lenght you need and at the last portion you will have a diferent lenght. So I think you can use MEASURE.

 

PS.

1. How can I give the profile in reference to take the Z value?

2. If you want to have X,Y,Z you must use points from coridor?

 

Mentor
JamaL9722060
Posts: 1,317
Registered: ‎04-09-2010
Message 5 of 7 (515 Views)

Re: Creating points at the stations of an alignment,

10-19-2012 01:57 AM in reply to: bpoleuca

Many thanks

 

To answer your two questions, please, have a look on the screenshots below.

 

My issue is how to create points (in a group say g3) at the stations of the alignment! That’s all!

 

Clip_230.jpg

 

Clip_231.jpg

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Valued Contributor
Postmaster_G
Posts: 72
Registered: ‎12-20-2012
Message 6 of 7 (233 Views)

Re: Creating points at the stations of an alignment,

04-07-2014 12:47 PM in reply to: JamaL9722060

I know this is an old thread, but did you ever solve this problem?

Mentor
JamaL9722060
Posts: 1,317
Registered: ‎04-09-2010
Message 7 of 7 (208 Views)

Re: Creating points at the stations of an alignment,

04-08-2014 11:08 AM in reply to: Postmaster_G

Sorry Postmaster. I didn’t any answer for this issue.

----------------------------------------------------------
Jamal NUMAN, GIS and Civil Engineer, MSc
e-mail: JamaL9722060@yahoo.com
P.O.Box: 731, Ramallah, West Bank, Palestine.
----------------------------------------------------------
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.