AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
greenju17
Posts: 40
Registered: ‎02-25-2013
Message 1 of 5 (213 Views)
Accepted Solution

Creating P&P sheets

213 Views, 4 Replies
12-10-2013 12:09 PM

I am creating P&P sheets for my road.  I created view frames, and when I got to create sheets, I pick "all layouts in new drawing".  I go to open the new drawing up, but all that shows up/tranfers is the profile and alignment, nothing else comes over ( proposed linework, existing linework, etc.)??????

Does the drawing you created the view frames in have the xreferences as "Attach" or "Overlay"?

I believe they have to be "attached" to push down to your P&P sheets during creation.

 

 

Valued Mentor
awood
Posts: 317
Registered: ‎06-24-2005
Message 2 of 5 (203 Views)

Re: Creating P&P sheets

12-10-2013 12:44 PM in reply to: greenju17

That is because it's creating Data References for the Civil 3d Alignments and Profiles and it doesn't recognise the other Civil 3D elements or the basic AutoCAD elements.

You will have to XRef the Proposed/Existing linework into the P&P drawings.

 

HTH

AWood

*Expert Elite*
klugb
Posts: 704
Registered: ‎09-04-2008
Message 3 of 5 (201 Views)

Re: Creating P&P sheets

12-10-2013 12:46 PM in reply to: greenju17

Does the drawing you created the view frames in have the xreferences as "Attach" or "Overlay"?

I believe they have to be "attached" to push down to your P&P sheets during creation.

 

 

Bruce Klug
AutoCAD Expert Elite
AutoCAD Civil 3D 2014 Certified Professional
Infrastructure Design Suite 2014 (SP2)
Testing Civil 3D 2015
Win 7 Pro, 64-bit
Active Contributor
greenju17
Posts: 40
Registered: ‎02-25-2013
Message 4 of 5 (159 Views)

Re: Creating P&P sheets

12-11-2013 06:02 AM in reply to: greenju17

ahh of course......I knew that haha

 

Thanks for the help

Active Contributor
greenju17
Posts: 40
Registered: ‎02-25-2013
Message 5 of 5 (95 Views)

Re: Creating P&P sheets

01-02-2014 07:17 AM in reply to: greenju17

So....finally got back to working on the P&P sheets, created new ones and created a new drawing for them.  Opened up the new drawing and all that is in there is the new profile views and the alignment.  So I went to Xref and added my base drawing and nothing shows up??  I cant get anything in the drawing but the profile views and alignment??

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.