Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

creating cross section sheets

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
MKH-VB
2361 Views, 2 Replies

creating cross section sheets

I am in the process of creating cross section sheets, but it is putting only 1 section per sheet, whereas there is room to put about 6 on each sheet.  Can someone tell me where to adjust this setting?  Thanks.

 

MKH

mkh
2 REPLIES 2
Message 2 of 3
jmayo-EE
in reply to: MKH-VB

Find your plan and profile template and added page setups with preconfigured viewports for your cross sections. This is a good place to begin.

 

http://docs.autodesk.com/CIVIL/2010/ENU/AutoCAD%20Civil%202010%20User%20Documentation/index.html?url...

 

Mapbooks can also be used. THis video includes setting up the template above.

http://www.youtube.com/watch?v=4ed-koQYrBE

John Mayo

EESignature

Message 3 of 3
mathewkol
in reply to: MKH-VB

If you've set up your template layout properly and this is still happening, you'll need to adjust your group plot style and the row and column spacing. Possibly the gris spacing as well.

Also, if you have any bands attached nake sure that the band title box is not very wide. Even if the box is not displayed, its width can affect section layout.
Matt Kolberg
SolidCAD Professional Services
http://www.solidcad.ca /

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report