Create EPS points from corridor

[juliarh]

I need to export points from my corridor.  One of the subassemblies is ShoulderVerticalSubbase.  The outside point of the shoulder subassembly has a point code EPS.  The EPS code is one that I need to create points from.

When I try to Create Points from my corridor, I can select Point Codes from a a list of 22.  EPS is not in the list (see image).  How can I create those points?

In case it matters: this corridor was created with Civil 3D 2009.  I'm now using it in Civil 3D 2012.

[sboon]

Is your corridor set to display a featureline at the EPS points?

Steve
Please use the Accept as Solution or Kudo buttons when appropriate

[juliarh]

Yes, it is.

[sboon]

If you have an EPS featureline in your corridor then you should be able to create points along it.  As a workaround try extracting the featureline from the corridor and then create points from that.

Steve
Please use the Accept as Solution or Kudo buttons when appropriate

[tcorey · Accepted solution]

Try replacing the 2009 version of the Subassembly with a modern version. I tested in 2015 and the point is available for extraction.