AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
GregLee5360
Posts: 6
Registered: ‎06-14-2012
Message 1 of 5 (257 Views)
Accepted Solution

CORRIDORS / ASSEMBLIES

257 Views, 4 Replies
06-14-2012 02:50 PM

I have created several different corridors (with different assemblies in them), but when I to to view sections the same assembly keeps showing up.  How do the sections get updated with the new assemblies?

It sounds like you haven't sampled the other corridors into your sample lines.  If you open the sample line group properties then you can see which sections are currently included, and add more data if necessary.

 

Clipboard01.png

 

 

*Expert Elite*
sboon
Posts: 2,226
Registered: ‎11-08-2005
Message 2 of 5 (236 Views)

Re: CORRIDORS / ASSEMBLIES

06-14-2012 08:19 PM in reply to: GregLee5360

It sounds like you haven't sampled the other corridors into your sample lines.  If you open the sample line group properties then you can see which sections are currently included, and add more data if necessary.

 

Clipboard01.png

 

 

Active Member
GregLee5360
Posts: 6
Registered: ‎06-14-2012
Message 3 of 5 (217 Views)

Re: CORRIDORS / ASSEMBLIES

06-15-2012 05:46 AM in reply to: sboon

Thank You for the tip, I really appreciate it!!

New Member
gary_tdq
Posts: 1
Registered: ‎07-12-2012
Message 4 of 5 (160 Views)

Re: CORRIDORS / ASSEMBLIES

07-12-2012 09:01 PM in reply to: GregLee5360

i m fresh user for autocad civil 3d 2010. i m facing  a problem with assemblie. i dont knw how to draw a trench excavation by using trench assemblies with varying width to each side.

 

is it gt d other way to draw it?

 

*Expert Elite*
sboon
Posts: 2,226
Registered: ‎11-08-2005
Message 5 of 5 (149 Views)

Re: CORRIDORS / ASSEMBLIES

07-12-2012 10:17 PM in reply to: gary_tdq

Please ask a new question in another new thread, rather than hijacking this one.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.