AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
amesteve
Posts: 6
Registered: ‎02-13-2008
Message 1 of 5 (189 Views)
Accepted Solution

Corridor section editor

189 Views, 4 Replies
02-21-2014 07:20 AM

While working in corridor section editor, I made some changes to the drawing prior to exiting the section editor, Now I can work normally in the tabs (paper space and model space) but when I change to model view, I see almost nothing. I ran the audit and it found no errors, closed and ran recover and nothing was done, saved and reopened and recieved, Drawing cannot locate the project (1113-134 Tallassee Downtown Revitalization-2EE9AA26-CF63-4428-B4F5-BD890B4D8071). What is this and is there any way to restore the connection???

That is Civil 3D telling you it can't reconcile the project association. Go to the Prospector tab of Toolspace, find Data Shortcuts, right click and pick Set Data Shortcuts Project Folder and go pick the project again.

*Expert Elite*
tcorey
Posts: 2,761
Registered: ‎12-18-2002
Message 2 of 5 (167 Views)

Re: Corridor section editor

02-21-2014 09:33 AM in reply to: amesteve

That is Civil 3D telling you it can't reconcile the project association. Go to the Prospector tab of Toolspace, find Data Shortcuts, right click and pick Set Data Shortcuts Project Folder and go pick the project again.

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
*Expert Elite*
LisaPohlmeyer
Posts: 601
Registered: ‎01-14-2009
Message 3 of 5 (166 Views)

Re: Corridor section editor

02-21-2014 09:33 AM in reply to: amesteve
This is the project assigned to the drawing and the message is telling you that it can't locate the project folder. From the prospector tab of the toolspace, in the Data Shortcuts section, rt-click Data Shortcuts and select the working folder. Dang it Tim, you beat me to it.
Lisa Pohlmeyer

C3D 2012 SP4, C3D 2015
Please use "Accept as Solution" if this solved your issue.
*Expert Elite*
tcorey
Posts: 2,761
Registered: ‎12-18-2002
Message 4 of 5 (160 Views)

Re: Corridor section editor

02-21-2014 09:35 AM in reply to: LisaPohlmeyer

Always one step ahead...

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
Active Member
amesteve
Posts: 6
Registered: ‎02-13-2008
Message 5 of 5 (129 Views)

Re: Corridor section editor

02-24-2014 06:42 AM in reply to: tcorey
This worked on 6 of 7 drawings in the project folder, all but the one that I was working on at the time it happened. Thanks tc and one step behind Lisa for your help.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.