Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
My corridor seems to be targeting a portion of the alignment some 1700 feet upstation (see attachment). Is there a setting to limit this? Or a workaround/solution?
Split your region and change the targets for the different regions.
It's tough to tell what's going on without seeing the actual drawing in a case like this.
Or perhaps your alignment isn't at the exact center of your cul-de-sac and the outside corridor baseline can't target the center alignment at that specific location but it can way over at the other side of the project.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")