Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I wonder if someone can help me please.
Is driving me crazy the boundary creation for the corridor.
I posted under the customer files two files: the XML data file with the alignment and the existing topo and the drawing file zipped.
I created the corridor ok using two assemblies and two regions.
I have added fro every range of stations the feature lines interactively from the boundary definition of the corridor surface.
For some reason the boundary is not constructed correctly.
I found quite tedious the boundary creation method in Civil3D
What is the problem with the boundary. Is it not formed in the right place or is it not working, even though it appears correct? I am having the latter problem.
By default, when you add a boundary interactively on a complex corridor, it is a render only boundary. Check the boundary type in the Boundary tab of the corridor properties dialog box.
You might also check the boundary difinition for your corridor. Sometimes it works better with only one direction checked, and sometimes with both. Try and see what you get. I have attached a shcrren shot of where I am talking about.
Eric R. Schaller, P.E.
City of Davenport, IA
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")