COPYCLIP and CUTCLIP Crash drawing

[csevers]

I don't know when this started happening, but i have a drawing that always crashes whenever I try to copy or cut anything. It is drawing specific. Anybody have any ideas? The drawing contains tons of C3D entities.

[jmayo-EE]

I don't believe the clipboard is really supported for C3D objects. It will work with some objects but not everything and you may be bringing a whole bunch of dependent C3D objects along for the ride. Are you coping Acad objects or C3D objects? If C3D objects reply with specifices. Copying a coridor will bring in the alignments, profiles, assemblies and it may be too much data for the clipboard. If you are copying a Feature line from a Grading it may just crash.

Acad objects work fine as long as the data isn't overload.

[csevers]

I'm just trying to copy a polyline.

[jmayo-EE]

That should work without issue. Have you recovered or run audit on the file?

The WBlock command may not solve the problem but you should be able to keep working.

[csevers]

Yes, i've tried recover and audit to no avail. I'm in the process of getting this hotfix installed: 

http://knowledge.autodesk.com/support/autocad/downloads/caas/downloads/content/autocad-C2-AE-dgn-hot...

and this 

https://apps.exchange.autodesk.com/ACD/en/Detail/Indexid=appstore.exchange.autodesk.com%3adrawingpur...

I will update if I have any luck.

If I try to wblock anything, the drawing crashes.

[csevers]

Here is a screen shot of the error I recieve when I try to use the copyclip or cutclip command 

[Anonymous]

Did you ever figure this out?  I have the same problem.

[jmartt]

I have same problem....anyone?