Contour labels have a perp line going thru it

[Anonymous]

When I label my Contour lines there is a blue line(perp) running right thru the middle of it.

I have looked to take it off but can not find it. Thanks for help

[Jay_B]

"Contour Label Line" set to False in Properties Palette.

This Can also be set to False in the Feature Settings Tab> Surface>Rt. Click>Edit Feature Settings>Contour Labeling Defaults>Display Contour Line>False in the dwt.

[Anonymous]

They are both set to true

[Jay_B · Accepted solution]

If you don't want to see the lines set them to False.

[BrianHailey]

HERE'S a write up I did on my blog a while back. It was done in the 2010 version of the software but it is still applicable for 2014.

[jmayo-EE]

If you have a bunch of them, select one, right-click and choose Select Similar so you can globally edit them.

Look into setting this behavior as default behavior in your company template so every time  you place a contour label the lines automatically hide. Look at the attachments to see how to do this.