AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Distinguished Contributor
Posts: 156
Registered: ‎11-30-2007
Message 11 of 12 (122 Views)

Re: constant slope

10-04-2012 02:17 PM in reply to: Joe-Bouza

ok i found it. i can only get the right side of the assembly. i want to use OW&MS1 is my best fit. how do i do the left side? it wont even let me mirror the thing! its only for the right side!

*Expert Elite*
Posts: 5,123
Registered: ‎12-15-2008
Message 12 of 12 (108 Views)

Re: constant slope

10-04-2012 03:01 PM in reply to: MonkeyTrainer

I highly recommend using OML2 but if you must.


the insert point offest + - gets it to the left or right side. study the subassembly help. Its vague but somewhat helpful


sample offset =0 = crown point / alignment (profile optional)

insert offset = the +- distance to you saw cut line


Here is my warning with this sub assemby: you cannot control the eop with a profile it : widen"Match"Slope thats what it does. Being you have a curbed edge that may or maynot workout for you depending on the existing condition grade.


Using the OML2 with a SuprAOR attached gives you flexibility with the eop via profile

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram

Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!