AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
62 Posts
7 Kudos
Registered: ‎07-01-2010
Post 11 of 12

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-30-2012 02:09 PM in reply to: RobR88
Creat another surface "Void-1". Paste the non-roadway surface into it. Add a boundary that matches the void area inside the roadway. Paste the three surfaces into your combined surface in this order: "Non-roadway surface", "roadway surface", "Void-1 surface".
*Expert Elite*
4,055 Posts
343 Kudos
Registered: ‎08-01-2008
Post 12 of 12

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

12-01-2012 03:44 AM in reply to: RobR88
this is the approach I'd take although just check that the triangles form correctly at all common boundaries. They usually do but occasionally you might have a gap which can be closed by adding a show boundary.
neilyj
(No connection with Autodesk other than using the products in the real world)


IDSP Premium 2015 (mainly Civil 3D 2015 UKIE & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 500Gb SSD, 1Tb HDD
32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHz
NVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!