AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
Kohntopp
Posts: 6
Registered: ‎03-16-2009
Message 1 of 5 (184 Views)

Combining a corridor surface with another surface

184 Views, 4 Replies
03-16-2009 06:44 AM
I have a corridor that begins on my existing surface and ends on my proposed surface. I am trying to have my corridor surface combine with the proposed surface. I edited my corridor properties to have it reference the proposed surface at the station where the centerline hits the edge of the proposed surface, but the corridor is not perpendicular with the edge of the proposed surface causing the corridor surface to be referencing my existing surface in a small area on one side of the corridor when it should be referencing the proposed surface and vice versa on the other side. When I paste my corridor surface into the proposed surface this creates a small ditch in my slope. What can I do to fix this problem?
Active Member
Kohntopp
Posts: 6
Registered: ‎03-16-2009
Message 2 of 5 (184 Views)

Re: Combining a corridor surface with another surface

03-18-2009 06:30 AM in reply to: Kohntopp
Does anyone have advice?
Distinguished Contributor
GlennPope
Posts: 109
Registered: ‎01-19-2009
Message 3 of 5 (184 Views)

Re: Combining a corridor surface with another surface

03-18-2009 06:40 AM in reply to: Kohntopp
Can you post an image showing the problem area?
Glenn Pope
Civil Designer/CAD Manager
River City Engineering
Active Member
Kohntopp
Posts: 6
Registered: ‎03-16-2009
Message 4 of 5 (184 Views)

Re: Combining a corridor surface with another surface

03-18-2009 06:47 AM in reply to: Kohntopp
see attachment
Distinguished Contributor
GlennPope
Posts: 109
Registered: ‎01-19-2009
Message 5 of 5 (184 Views)

Re: Combining a corridor surface with another surface

03-18-2009 07:07 AM in reply to: Kohntopp
Attached image for better clarity. Basically you will need to have a region with one side targeting the proposed surface. Then start another region when the other side needs to start targeting proposed
Glenn Pope
Civil Designer/CAD Manager
River City Engineering
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.