AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
mermerCAD
Posts: 132
Registered: ‎08-22-2008
Message 1 of 4 (374 Views)
Accepted Solution

Civil 3D Survey dual feature code

374 Views, 3 Replies
10-02-2012 08:39 AM

Is there a way we can support a duel feature code ?

In the field the surveyor would enter into his file “ EWD[*TB[“ .  ------This code indicates the  beginning of the “Edge of Woods” and “Top of Bank”  .

Each shot after that would be along the edge of woods and top of bank . “EWD*TB” -- This code indicates shots taken along  the “Edge of Woods” and “Top of Bank”

The surveyor would end this feature with    “ EWD]*TB]“ ---------------This code indicates the  ending of the “Edge of Woods” and “Top of Bank”  

 

Thanks for your help!

There are some good examples of this in the help  search

 

Survey Linework


mermerCAD wrote:

Is there a way we can support a duel feature code ?

In the field the surveyor would enter into his file “ EWD[*TB[“ .  ------This code indicates the  beginning of the “Edge of Woods” and “Top of Bank”  .

Each shot after that would be along the edge of woods and top of bank . “EWD*TB” -- This code indicates shots taken along  the “Edge of Woods” and “Top of Bank”

The surveyor would end this feature with    “ EWD]*TB]“ ---------------This code indicates the  ending of the “Edge of Woods” and “Top of Bank”  

 

Thanks for your help!


You could use "EWD ST TB ST" as the first shot, then the middle shots would be "EWD TB" then finish the two figures with "EWD END TB END".  That's how we would do it.

Just note that if you are using symbols and description keys, the first code gets the symbol.

Distinguished Mentor
rl_jackson
Posts: 873
Registered: ‎01-20-2008
Message 2 of 4 (370 Views)

Re: Civil 3D Survey dual feature code

10-02-2012 09:20 AM in reply to: mermerCAD

There are some good examples of this in the help  search

 

Survey Linework

C3D12-13
Win7x64 6gb
Valued Mentor
engrtech
Posts: 765
Registered: ‎05-05-2008
Message 3 of 4 (334 Views)

Re: Civil 3D Survey dual feature code

10-03-2012 07:03 AM in reply to: mermerCAD

mermerCAD wrote:

Is there a way we can support a duel feature code ?

In the field the surveyor would enter into his file “ EWD[*TB[“ .  ------This code indicates the  beginning of the “Edge of Woods” and “Top of Bank”  .

Each shot after that would be along the edge of woods and top of bank . “EWD*TB” -- This code indicates shots taken along  the “Edge of Woods” and “Top of Bank”

The surveyor would end this feature with    “ EWD]*TB]“ ---------------This code indicates the  ending of the “Edge of Woods” and “Top of Bank”  

 

Thanks for your help!


You could use "EWD ST TB ST" as the first shot, then the middle shots would be "EWD TB" then finish the two figures with "EWD END TB END".  That's how we would do it.

IDSP 2015
Windows 8.1 Pro 64-bit
8GB RAM
*Expert Elite*
jmayo
Posts: 3,030
Registered: ‎11-13-2006
Message 4 of 4 (328 Views)

Re: Civil 3D Survey dual feature code

10-03-2012 07:42 AM in reply to: mermerCAD

Just note that if you are using symbols and description keys, the first code gets the symbol.

John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.