DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Solved! Go to Solution.
Solved by DarrenP. Go to Solution.
read me attached
DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
dang
DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
The AutoCAD SP1 is ±45MB
The Map SP1 is ±103MB
The C3D SP1 is ±63MB
Yet the C3D SP contains all the fixes/features of the AutoCAD SP1 _and_ the AutoCAD Map SP1...
Those are some magic bytes 🙂
I installed the SP too. Will report back if I encounter any issues.
@rkmcswain wrote:
The AutoCAD SP1 is ±45MB
The Map SP1 is ±103MB
The C3D SP1 is ±63MB
Yet the C3D SP contains all the fixes/features of the AutoCAD SP1 _and_ the AutoCAD Map SP1...
Those are some magic bytes 🙂
Map in C3D isn't the full AutoCAD Map 3D. So it looks like they had to fix a lot in what we don't get unless we have IDS. Which reminds me. I suppose that I'll have to download all the SP's since I have IDSP that gives me full Map and a separate install of AutoCAD.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
plus Map 3d has a another service pack that Civil 3d doesn't have which is for infrastructure administrator
if you use that
DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I see based on the README that the incorrect reading of a GeoTIFF's unit field in the header hasn't been fixed, nor the bug where an IDSP C3D corrupts every workspace causing profile view lineweights to not work correctly, nor anything about QTO, nor anything about the Create Alignment from Corridor not working correctly if the alignment has super elevation applied.
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
@neilyj666 wrote:
I recently posted that I've never had any issues that a service pack has apparently fixed..... presume they only tackle the really easy ones. ..;)
Yea, I would like to know how that works.
I have not had time to check these out, but I suspect most of them are unaddressed.
I didn't have any issues at all, until I installed the service pack (well, apart from crashing if I paste special from a pdf.)
Now I can't get the properties box by double clicking.
I've also lost those nice window tabs