AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
Jon0001
Posts: 26
Registered: ‎02-10-2011
Message 1 of 8 (894 Views)
Accepted Solution

Civil 3D 2013 Crashing on Export to CAD when pipes in profile view

894 Views, 7 Replies
01-10-2013 03:45 PM

So I have been getting a fatal error "INTERNAL ERROR: !dbobji.cpp@8743: eNotOpenForWrite" when I try to export to 2010 CAD.

 

I have worked out that it happens when pipes are displayed in the profile view.

 

ANyone have this problem or know of a fix?

We ended up redoing the drawings and all is working fine now.

*Expert Elite*
tcorey
Posts: 2,761
Registered: ‎12-18-2002
Message 2 of 8 (887 Views)

Re: Civil 3D 2013 Crashing on Export to CAD when pipes in profile view

01-10-2013 04:42 PM in reply to: Jon0001

Did try a Recover?

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
Active Contributor
Jon0001
Posts: 26
Registered: ‎02-10-2011
Message 3 of 8 (874 Views)

Re: Civil 3D 2013 Crashing on Export to CAD when pipes in profile view

01-11-2013 07:50 AM in reply to: tcorey

Yes we have tried a recover and audit and removed all xrefs

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 4 of 8 (869 Views)

Re: Civil 3D 2013 Crashing on Export to CAD when pipes in profile view

01-11-2013 10:35 AM in reply to: Jon0001

Check that none of the layers associated with pipes in profile view are locked/frozen.

 

Test: try exporting to ACAD 2013 first.  Then open that up and export again to 2010.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Active Contributor
Jon0001
Posts: 26
Registered: ‎02-10-2011
Message 5 of 8 (845 Views)

Re: Civil 3D 2013 Crashing on Export to CAD when pipes in profile view

01-14-2013 07:19 AM in reply to: troma

We ended up redoing the drawings and all is working fine now.

Member
engngr_ats
Posts: 3
Registered: ‎06-20-2013
Message 6 of 8 (561 Views)

Re: Civil 3D 2013 Crashing on Export to CAD when pipes in profile view

06-20-2013 05:46 AM in reply to: Jon0001
Keep getting the internal error.
Jon0001, redoing the drawings? What did you do exactly?
Active Contributor
Jon0001
Posts: 26
Registered: ‎02-10-2011
Message 7 of 8 (555 Views)

Re: Civil 3D 2013 Crashing on Export to CAD when pipes in profile view

06-20-2013 07:31 AM in reply to: Jon0001

We ended up purging the Civil 3d of all excess settings and styles and it seemed to work.

Member
engngr_ats
Posts: 3
Registered: ‎06-20-2013
Message 8 of 8 (483 Views)

Re: Civil 3D 2013 Crashing on Export to CAD when pipes in profile view

08-06-2013 10:52 PM in reply to: Jon0001

Decided it would be the same or easier way: save c3d .dwg with proxy images, then open .dwg in plain autocad [, explode proxies and finally remove proxies if it's nessesary].

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.