AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Contributor
patferrell3461
Posts: 12
Registered: ‎06-29-2010
Message 21 of 28 (770 Views)

Re: Civil 3D 2012 text

09-16-2011 06:13 AM in reply to: patferrell3461

patferrell3461 wrote:

I don't have a solution (sorry). But I am having the same problem on my installation and one other installation in the office.

 

Interestingly though, it is only happeing with our two 32-bit installations. The other guy in the office with AutoCAD is running 64-bit and says that it has yet to happen to him...

 

(All three installations are Civil 3D 2012)


 

 

 

**UPDATE 9-16-11: It has begun happening on the 64-bit installation as well now.

New Member
lamaideluna
Posts: 1
Registered: ‎11-08-2011
Message 22 of 28 (652 Views)

Re: Civil 3D 2012 text

11-08-2011 09:05 AM in reply to: mbm98

I just needed to let you know. Thank you so much!!!

I almost lost it here!

Thank you, Thank you!

Va1
Active Member
Va1
Posts: 10
Registered: ‎02-07-2010
Message 23 of 28 (634 Views)

Re: Civil 3D 2012 text

11-08-2011 12:50 PM in reply to: aslove

I was in the habit of purging and auditing a file before closing it. Recently I have found that if I don't purge after editing some text and then close the file Civil3d crashed. Also I have found the problem in dimensions (if I override the text) and multi-leaders.

 

It would be nice to hear from Autodesk seeing as there is a similar thread from 2008.

http://forums.autodesk.com/t5/AutoCAD-Land-Desktop/Internal-Error-cannot-open-MTEXT-to-write-changes...

Even if its not a solution some work-a-round would be good. Like setting audit to run in the background before or after autosave.

Active Member
parker
Posts: 7
Registered: ‎06-10-2010
Message 24 of 28 (571 Views)

Re: Civil 3D 2012 text

11-18-2011 06:11 AM in reply to: aslove

I think it is obvious now that Autodesk isn't doing anything about this. It's been a problem since the day I downloaded 2012.

*Expert Elite*
Jeff_M
Posts: 4,474
Registered: ‎07-22-2003
Message 25 of 28 (566 Views)

Re: Civil 3D 2012 text

11-18-2011 06:20 AM in reply to: parker

parker wrote:

I think it is obvious now that Autodesk isn't doing anything about this. It's been a problem since the day I downloaded 2012.


You should check before you speak...SP1 was released yesterday which fixes this.

Jeff_M, also a frequent Swamper
Active Member
parker
Posts: 7
Registered: ‎06-10-2010
Message 26 of 28 (559 Views)

Re: Civil 3D 2012 text

11-18-2011 06:25 AM in reply to: Jeff_M

Thanks!!! I had given up on it...Seemed like it should have been fixed easily and a lot quicker though..

kim
Member
kim
Posts: 5
Registered: ‎10-22-2008
Message 27 of 28 (264 Views)

Re: Civil 3D 2012 text

12-14-2012 01:48 PM in reply to: aslove

I'm still on civil3d2009 and ironically only having issued with "dragged labels" in one particular drawing.  I think it was corrupted on another work station.  I've audited and purged a 100 times.  Changed the DTEXTED to 1 as noted, ran audit and saved... dragged the first label to new position, no problem, dragged the second and ... same thing -freezing up.  Have to resort to ctrl alt delete to close program and even then, it takes forever.  Is there a fix for this in 2009?

Active Member
mbm98
Posts: 7
Registered: ‎02-05-2009
Message 28 of 28 (254 Views)

Re: Civil 3D 2012 text

12-14-2012 02:10 PM in reply to: patferrell3461

Kim,

 

Sorry to read that you are still having problems. The group I worked with had to scrap our template drawing and start a new template in 2009 format. We had used a 2002 drawing before that and just saved it in 2009 format. As it turned out, that wasnt the best strategy. I dont know if the service packs for 2009 ever fixed the underlying issue because we moved to C3D 2010 & then C3D 2012. We have been using a 64bit load of Windows 7 with Civil 3d 2012 and it has been rock solid. The key for us was creating a new template in the version we were working in and then just insert our blocks & styles as needed.  

 

Wish I had better news for you!

 

M...

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!