AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
SOJU
Posts: 3
Registered: ‎09-26-2012
Message 1 of 5 (293 Views)

Channel subassembly

293 Views, 4 Replies
09-26-2012 01:12 PM

How can I get the channel subassembly to attach to the assembly insertion point at the channel flowline marker?  I need the flowline to follow my profile elevations.

Distinguished Mentor
castled071049
Posts: 823
Registered: ‎11-15-2005
Message 2 of 5 (266 Views)

Re: Channel subassembly

09-27-2012 07:37 AM in reply to: SOJU

Try this: attach the channel subassembly to the assembly center marker normally. The flowline should be some distance below the assembly center marker, depending on your specifications. Next, use the Autocad MOVE command to move the channel subassembly vertically up the distance from the assembly center marker to the channel flowline.

 

The assembly should now behave as you want.

Member
SOJU
Posts: 3
Registered: ‎09-26-2012
Message 3 of 5 (264 Views)

Re: Channel subassembly

09-27-2012 07:49 AM in reply to: castled071049
I have tried that but it would only allow the channel assembly to attach at the elevation of the point code: channel top. I need to somehow attach at the point code: channel bottom. Shirley D. Wilson, E.I. EJES, Inc. 201 Wilkinson Street Shreveport, LA 71104 Phone: (318) 670-7275 Fax: (318) 670-7284 Cell: (713) 689-4272
Distinguished Mentor
castled071049
Posts: 823
Registered: ‎11-15-2005
Message 4 of 5 (260 Views)

Re: Channel subassembly

09-27-2012 07:53 AM in reply to: SOJU

I just tried it and it worked great. Did you attach it first normally, at the point code channel top? Then use the normal, regular, run-of-the-mill Autocad MOVE command (NOT the Move command associated with assembly construction) to move it up? It should work easily.

Member
SOJU
Posts: 3
Registered: ‎09-26-2012
Message 5 of 5 (257 Views)

Re: Channel subassembly

09-27-2012 08:01 AM in reply to: castled071049
Wow! That did work so easily. I don't remember that being allowed in 2010. Now that I'm using 2012 I have to catch up with the features. Thanks for your help. Shirley D. Wilson, E.I. EJES, Inc. 201 Wilkinson Street Shreveport, LA 71104 Phone: (318) 670-7275 Fax: (318) 670-7284 Cell: (713) 689-4272
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.