AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
alex
Posts: 99
Registered: ‎11-03-2011
Message 1 of 3 (229 Views)

CENTER CROSS SECTIONS IN VIEW FRAME

229 Views, 2 Replies
05-01-2012 05:38 AM

Hello, I am have trouble figuring out what you edit to move the origin of each cross section inside a veiw frame.

thanks, alex

Distinguished Contributor
tscheevel
Posts: 330
Registered: ‎10-14-2003
Message 2 of 3 (223 Views)

Re: CENTER CROSS SECTIONS IN VIEW FRAME

05-01-2012 07:40 AM in reply to: alex

I haven't found a setting that fixes that problem. My work around is to create a section view band style with all elements turned off. It'll leave room for the text box even though it's not visible. You'll have to experiment with the text box width. I'm using 0.2". Thas's on a 11x17 sheet with the viewport set at 20 scale.

Valued Contributor
alex
Posts: 99
Registered: ‎11-03-2011
Message 3 of 3 (205 Views)

Re: CENTER CROSS SECTIONS IN VIEW FRAME

05-01-2012 10:08 AM in reply to: tscheevel

THANKS. GOOD THINKING.

ANOTHER THING THAT IS PUZZELING IS IN THE FIRST SECTION THE LINE STOPS AT AROUND 50' BUT THE SURFACE GOES OUT 130'.  ON ALL THE OTHER SECTIONS IT GOES OUT TO 130.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.