Can someone tell me why I can't label certain pipes/structures? I can select the pipe or structure, rt click, add label and I get nothing. The layer is on cause I can see other labels. I also get the same result when I go to annotation, pipe label. This only happenes to certain pipes or structure, others in the same network label fine. I'm kind of at a loss.
Is the layer off or frozen?
Is the default label style (command setting) set to None or No Display?
Again, it's just certain pipes or structures. The pipes and structures in the same profile view just the downstream from the problem ones label fine.
well, if it's the same thing i've seen on my profiles, even when an alignment starts at 0+00 and goes to something like 1+53 from a few structures, you have to set the profile view to something like -0+50 and 2+00 (or some other value beyond the length of the profile) for those end structure and pipe labels to show up.
But, if it's a band thing, you'll want to check the option to show band labels at start and end...
here is what i usually do.
Still can't label the pipe. Here is the kicker, I can label the pipe in plan just fine, just not in profile view. Here is what I get:
Select profile view:
Selected entity must be of type: Profile View
Are you selecting the profile view before selecting the pipe?
Access a broad range of knowledge to help get the most out of your products and services.