AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
tdinkins
Posts: 3
Registered: ‎12-02-2013
Message 1 of 6 (588 Views)
Accepted Solution

C3D to HecRAS export issues

588 Views, 5 Replies
12-02-2013 01:10 PM

I am trying to use the "Export to HEC RAS" output tool in C3D 2011 and have come across a strange problem. I know that CAD and HECRAS view alignments in opposite directions (CAD - stationing from upstream to downstream, HECRAS - stationing from downstream to upstream), and understand the process of utlizing "GIS Tools" within RAS to reverse the flow direction. However, I am having a issue with georeferencing the alignment and cross sections during the "Import Geometry Data"_"GIS Format."

 

Once I click the "Finished-Import Data" within the Import Geometry Data dialogue, my stream alignment does not extend all the way to my most downstream cross section, and I'm getting an error message saying...

 

"Some of the cross sections on the schematic are drawn outside the reach bounds. This indicates that the river/reach network has not been georeferenced and/or all of the cross sections have not been georeferenced."

(see screen shot attachment below)

 

The two cross sections that are outside the reach bounds show up in the profile view and cross section editor view.

 

If I ignore the error message and click "Remove GeoReferencing" I lose the ability to "flip Coord Order" of the reach lines and cut lines. This is problematic becuase I can't get my reach stationing or cut line orientation fixed.

 

If anyone has come across this problem and knows a fix/work around, your input would be greatly appreciated.

 

thanks,

 

TC

I was able to solve the problem.

 

Apparently something was funky with my alignment. I solved it by creating a copy of the alignment by a simple 1ft offset away from and the a 1ft offset back. I used this polyline to create a new alignment/sections and bingo!

 

Who knows what was screwed up with the initial alignment...

 

TC

Active Contributor
Wilbers2013
Posts: 39
Registered: ‎10-14-2008
Message 2 of 6 (552 Views)

Re: C3D to HecRAS export issues

12-04-2013 02:36 AM in reply to: tdinkins

Will it be possible to post a drawing?

Willie Wilbers
AutoCAD & Civil 3D 2014
ArcGIS 10.1
Active Contributor
Wilbers2013
Posts: 39
Registered: ‎10-14-2008
Message 3 of 6 (540 Views)

Re: C3D to HecRAS export issues

12-04-2013 06:32 AM in reply to: Wilbers2013

Check if your alignment and/of some of the cross-sections goes over the edge of the surface.  We have had problems with that.

Willie Wilbers
AutoCAD & Civil 3D 2014
ArcGIS 10.1
*Expert Elite*
jmayo
Posts: 3,002
Registered: ‎11-13-2006
Message 4 of 6 (523 Views)

Re: C3D to HecRAS export issues

12-05-2013 11:08 AM in reply to: tdinkins
I find Robert Stelmans River Tools better suited for c3d to hec ras and back.
John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
*Expert Elite*
jmayo
Posts: 3,002
Registered: ‎11-13-2006
Message 5 of 6 (520 Views)

Re: C3D to HecRAS export issues

12-05-2013 11:09 AM in reply to: tdinkins
If ur interested
http://www.rsteltman.com/
John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
Member
tdinkins
Posts: 3
Registered: ‎12-02-2013
Message 6 of 6 (517 Views)

Re: C3D to HecRAS export issues

12-05-2013 11:26 AM in reply to: tdinkins

I was able to solve the problem.

 

Apparently something was funky with my alignment. I solved it by creating a copy of the alignment by a simple 1ft offset away from and the a 1ft offset back. I used this polyline to create a new alignment/sections and bingo!

 

Who knows what was screwed up with the initial alignment...

 

TC

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!