AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
ccookusi
Posts: 144
Registered: ‎02-28-2007
Message 1 of 7 (880 Views)

C3D 2013 Profile Linetype generation

880 Views, 6 Replies
08-22-2012 05:23 AM

This does not seem to be working in 2013 when the profile is a reference.

Any ideas?

 

Windows 7 Pro x64
Civil 3D 2015
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
*Expert Elite*
LisaPohlmeyer
Posts: 601
Registered: ‎01-14-2009
Message 2 of 7 (852 Views)

Re: C3D 2013 Profile Linetype generation

08-22-2012 11:44 AM in reply to: ccookusi

If it helps any, I can replicate this.  Seems to work fine in 2012.

Lisa Pohlmeyer

C3D 2012 SP4, C3D 2015
Please use "Accept as Solution" if this solved your issue.
Employee
hgohel
Posts: 267
Registered: ‎05-17-2006
Message 3 of 7 (796 Views)

Re: C3D 2013 Profile Linetype generation

08-29-2012 01:03 PM in reply to: ccookusi

We have filed defect 1471381 to track this.  Thank you for your report.

 

Himanshu Gohel
Autodesk, Inc
Valued Contributor
kolk
Posts: 66
Registered: ‎01-16-2007
Message 4 of 7 (753 Views)

Re: C3D 2013 Profile Linetype generation

10-19-2012 07:34 AM in reply to: hgohel

Has there been any resolution to this issue yet?

Mentor
ceethreedee.com
Posts: 197
Registered: ‎10-04-2012
Message 5 of 7 (685 Views)

Re: C3D 2013 Profile Linetype generation

11-14-2012 07:04 PM in reply to: kolk

Profile Linetype generation will not work for "surface" profiles that are data shortcutted.

 

The surface profile needs to be created in the drawing that contains the profile view.

 

Its okay to dref design profiles though, jsut not surface profiles. You will also notice that surface profiles that are dreffed are static and not dynamic! Not sure if this is how autodesk intended the workflow to be though.

 

Regards

 

Kapanther

Civil 3D 2014 (SP2)
Win 7 Pro x64 -DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680) -24Gb Ram
NVIDIA Quadro 2000 (1GB)
ceethreedee.com
Employee
hgohel
Posts: 267
Registered: ‎05-17-2006
Message 6 of 7 (666 Views)

Re: C3D 2013 Profile Linetype generation

11-16-2012 05:57 AM in reply to: ceethreedee.com

bkanthergolder wrote:
You will also notice that surface profiles that are dreffed are static and not dynamic! Not sure if this is how autodesk intended the workflow to be though.

 

DRef surface/dynamic profiles are treated as static in the drawings in which they are referenced and that is the expected behavior. That said, if the surface is updated and references are synchronized the profile will update.
Himanshu Gohel
Autodesk, Inc
New Member
pmahobian
Posts: 2
Registered: ‎02-18-2013
Message 7 of 7 (329 Views)

Re: C3D 2013 Profile Linetype generation

11-19-2013 02:58 PM in reply to: kolk

Synchronize the profile in the referenced drawing... that should fix the issue.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.