Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Bringing my Modelspace Profile Labels into my Sheet Profile gird
Bringing my Modelspace Profile Labels into my Sheet Profile gird
Anyone knows how I can properly bring in my Profile labels into the Profile grids of my sheets which I created with "Create Sheets" wizard. On "Layout Creation" options I created 6 new layouts per new drawing. It seemed my Profile labels were outside the Sheet grid extents.
First thing I would check are the elevations in the profile views. It is not uncommon for the profile views created via the sheet creation tools to have elevations too high or too low relative to the pipes, road, or whatever is being profiled. Simply adjusting the elevtions will reveal all unto ye.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")