AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Brian Hailey
Message 1 of 3 (50 Views)

Breaking Breaklines

50 Views, 2 Replies
02-18-2004 07:29 AM
Hello everyone, I've noticed that if you break a breakline into two seperate breaklines, all information from that line gets removed from the surface. Is this by design? If so, I don't like it. I would much rather have original line removed from the surface and the two new lines added to it. Brian
*Daniel Philbrick
Message 2 of 3 (50 Views)

Re: Breaking Breaklines

02-20-2004 05:04 AM in reply to: *Brian Hailey
Brian, If you use the AutoCAD break command on a breakline, a portion of the original breakline does remain as a breakline, and the second part is removed from the surface definition. Your suggestion of having both segments of the breaklines remain as part of the surface definition is probably better (and expected) behavior. Thanks for the input. Daniel Philbrick ISD Civil Development "Brian Hailey" wrote in message news:403384cb$1_3@newsprd01... > Hello everyone, > > I've noticed that if you break a breakline into two seperate breaklines, all > information from that line gets removed from the surface. Is this by > design? If so, I don't like it. I would much rather have original line > removed from the surface and the two new lines added to it. > > Brian > >
*Brian Hailey
Message 3 of 3 (50 Views)

Re: Breaking Breaklines

11-08-2004 01:41 PM in reply to: *Brian Hailey
Hi Dan, I noticed this was not implemented in 2005. I think this is a very important aspect of the program that needs to be addressed. Brian "Daniel Philbrick" wrote in message news:403605ea$1_2@newsprd01... > Brian, > > If you use the AutoCAD break command on a breakline, a portion of the > original breakline does remain as a breakline, and the second part is > removed from the surface definition. Your suggestion of having both > segments of the breaklines remain as part of the surface definition is > probably better (and expected) behavior. > > Thanks for the input. > > Daniel Philbrick > ISD Civil Development > > > "Brian Hailey" wrote in message > news:403384cb$1_3@newsprd01... >> Hello everyone, >> >> I've noticed that if you break a breakline into two seperate breaklines, > all >> information from that line gets removed from the surface. Is this by >> design? If so, I don't like it. I would much rather have original line >> removed from the surface and the two new lines added to it. >> >> Brian >> >> > >
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.