at some point, in some place and time, JackOfHearts typed:
> Hy,
> i cant figure smth out. I created a surface, then alignment, and from
> those two, profile with profile view like I always do. This profile
> view has band labels, and there is the problem. Some band data is
> missing and i cant figure it out, pliz look at attached file.
>
> THX for any help.
The problem is competing labels are running interference. It's my
experience that if competing labels within a band overlap, they tend not to
show, whether the label is actually populated or not. You can solve the
problems by turning off the labels in the display settings for the band.
For your station and elevation bands turn off the following layers in the
band style:
Major Ticks
Minor Ticks
Ticks at Vertical Geometry
Ticks at Station Equation
Labels at Major Station
Labels at Minor Station
Labels at Vertical Geometry
Labels at Station Equation
In other words, only have layers on that are absolutely required for the
band.