AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
New Member
mauricio.sibulski
Posts: 2
Registered: ‎09-21-2012
Message 1 of 2 (378 Views)

Autocad Civil 3D - problem in alignment numeration

378 Views, 1 Replies
09-21-2012 01:51 PM

Hey guys,

I’m new in this fórum and I have a problem with Autocad Civil 3D. I have created an alignment by a polyline, have put arcs and tangents and a Label for identify the number of each Arc and Tangent, as the image shows, but has a section that the numbering is wrong, instead of being 24, 25, 26, 27, 28, 29, 30, 31, became 24, 25, 28, 27, 30, 31 ...

I try change somethings, but aparently the Autocad Civil don’t know how count sometimes, I hope you know a solution of my problem.

And as you should have seen, I don’t speak English a lot… Just in complicated situations. hehe

Thank you.
Mauricio Sibulski

*Expert Elite*
sboon
Posts: 2,148
Registered: ‎11-08-2005
Message 2 of 2 (347 Views)

Re: Autocad Civil 3D - problem in alignment numeration

09-22-2012 09:08 AM in reply to: mauricio.sibulski

The label and curve tags are numbered in the order they're created.  You can renumber them to suit your needs.  Check the help files at the link.

 

http://docs.autodesk.com/CIV3D/2012/ENU/filesCUG/GUID-11B62A91-11FC-4D47-BFEE-886D61D7FA9-2142.htm#G...

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.