AutoCAD Civil 3D 2012 - Service Pack 2 has been posted to our internal staging server and should be up on Autodesk.com soon. It was also posted to our server that pushes updates to Communication Center so you may get notification and could download the update via Com Center (this is live for some people now).
Service Pack 2 includes the fixes from the AutoCAD and Map 3D Service Pack 2s and includes Civil 3D 2012 Service Pack 1.
One fix that didn't get highlighted in the Read Me was the defect that linetypes gaps weren't maintained correctly between elements for alignments, survey figures and feature lines. This has been corrected for Service Pack 2.
Well it installed but when I go to edit survey figure properties, I dont have the point strings to add or change the figure. Is this something they took out of 12, as I have been almost exclusively using 11
Bet they haven't fixed the DRIVE command which they broke in SP1......
Better not bet too much....see my replies to your previous posts reporting this as broken. :-)
To edit survey figures, right click on the figure in the drawing and use the "Edit Survey Figure Properties" command. This will display a dialog that look the the attached. You can move points up and down in the figure, reverse all or parts of the figure, add points or picks to the figure, etc.
I think I solved the issue. Originally I cretated the SDB in C3D11, when I created a new SDB with 12 all was good.
Do I need to migrated a C3D11 SDB to 12, I thought they were the same?
How long did it take for people to install? My scren has been "gathering required information" for about an hour and a half - it was a network install, even after a clean restart, not feeling I'm going to see it get past this screen...
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!