AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Mentor
343 Posts
4 Kudos
Registered: ‎07-25-2006
Post 1 of 4
Accepted Solution

Auto stagger band lines

1455 Views, 3 Replies
01-10-2012 08:32 AM

At the end of the band on my profile view the labels overlap so I select the band and go to the properties pallet and change the Auto Stagger setting to "Offset Both Sides". The problem is that white lines appear above the labels on the bottom of my profile view. I have the leader line for the dragged state turned off, but they still appear. Is there some setting to make those lines go away?

Thank you andrewpuller3811 and machadt. I set the color of the leader to true color 255,255,255 and then sent the band to the back. Now it prints white and under everything else so it is totally invisible.

Distinguished Mentor
796 Posts
126 Kudos
Registered: ‎07-30-2008
Post 2 of 4

Re: Auto stagger band lines

01-11-2012 01:11 PM in reply to: jbear0000

The white line is the jog line.

 

It shows as you have it when the stagger heght is zero.

 

The jog line colour is based on the dragged state leader colour, so to fix it, change your dragged state leader colour to be the same as your band border colour.

If this fixed your issue, click on "Accept as Solution"

Andrew Puller
Maitland, NSW, Australia
Windows 7 Enterprise 64bit
Intel core i7 2600 @ 3.40 GHz with 16GB Ram
Civil 3d 2013 64bit
Alumni
129 Posts
8 Kudos
Registered: ‎10-25-2011
Post 3 of 4

Re: Auto stagger band lines

01-11-2012 05:25 PM in reply to: jbear0000

Hi Jason,

That is one of those hard codes setting that we can’t control or change, the only way to make it work for you is to setting up the color and layer for the data set labels to match the color of your Profile Data Band Style.

Hope this will help.

Tatiana Machado
AEC-ENI Application Engineer
Mentor
343 Posts
4 Kudos
Registered: ‎07-25-2006
Post 4 of 4

Re: Auto stagger band lines

01-12-2012 05:38 AM in reply to: machadt

Thank you andrewpuller3811 and machadt. I set the color of the leader to true color 255,255,255 and then sent the band to the back. Now it prints white and under everything else so it is totally invisible.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post