AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
balloonsrise
Posts: 422
Registered: ‎06-02-2006
Message 1 of 3 (327 Views)
Accepted Solution

auto-hatch survey figures

327 Views, 2 Replies
10-31-2012 05:40 AM

Is there a way to have certain figures auto-hatch upon import?

Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600

You can set up the figure prefix database so that figures with certain names will be defined as lot lines.   When importing into the drawing, lot lines that form closed areas will define parcels. 

 

Set the default parcel style to have the parcel area fill component visible.   You may also need to clear the Observe fill distance option on the Parcel Style Design tab.

Valued Mentor
david.zavislan
Posts: 267
Registered: ‎10-31-2006
Message 2 of 3 (295 Views)

Re: auto-hatch survey figures

11-01-2012 08:21 AM in reply to: balloonsrise

You can set up the figure prefix database so that figures with certain names will be defined as lot lines.   When importing into the drawing, lot lines that form closed areas will define parcels. 

 

Set the default parcel style to have the parcel area fill component visible.   You may also need to clear the Observe fill distance option on the Parcel Style Design tab.

David Zavislan, P.E. | Wood Rodgers, Inc.
Distinguished Contributor
cbaildon001
Posts: 158
Registered: ‎06-28-2008
Message 3 of 3 (115 Views)

Re: auto-hatch survey figures

04-02-2014 06:31 PM in reply to: david.zavislan

That's good. But it would be better if it could apply a fill style based on the particular figure style or apply a particular parcel style to a point code from the figure prefix database.

 

EG. different fills for ponds, buildings, vegetation, swamp etc.

 

A wish list item I suppose? 12D can do it.

 

Cheers

Caleb Baildon
Surveyor
Opus International Consultants Ltd
Greymouth, New Zealand
Civil3D 2015 - Windows7 64bit
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.