Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Assembly Style Marker

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
ejfancett
2696 Views, 5 Replies

Assembly Style Marker

Anyone know how to turn off the yellow flags.  See the attachment photo.  I click on them and the whole assembly is lit. I am at a loss.  What am I missing?

 

Any help will be appreciated.

 

EJ 

5 REPLIES 5
Message 2 of 6
mathewkol
in reply to: ejfancett

That is part of the LaneSuperElevationAOR subassembly, no need to remove it.  The potential pivot property controls it.

Matt Kolberg
SolidCAD Professional Services
http://www.solidcad.ca /
Message 3 of 6
wizengr
in reply to: mathewkol

I thought the flags can be turned off by opening the Properties Palette, selecting the Assembly and then setting the "Potetial Pivot" option in the Tool Palette to "No".

Message 4 of 6
mathewkol
in reply to: wizengr

Yes, that's what I meant in my comment [...The potential pivot property controls it....]

Matt Kolberg
SolidCAD Professional Services
http://www.solidcad.ca /
Message 5 of 6
ejfancett
in reply to: ejfancett

Thanks!  It is on the subassembly properties.  I should of checked there, but since it lit up with the assembly I was confused.

Message 6 of 6
Grimes_MG
in reply to: ejfancett

How would you not display and/or not plot the "Potential Pivot" object if your road need one? I am using the assembly as a "typical cross section" in a drawing and the PP object is plotting.

Win7 (x64), EVGA 790i, 8GB RAM, EVGA 8800GT, 250 GB iSSHDD, & RAID 0/1

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report