I don't know why when I make an automatic intersection the curb assembly is placed on a lower elevation respect to the main and second roads in all quadrants
I post a screen capture of the issue.
Any help will be appreciated...
Solved! Go to Solution.
It looks like your elevation targets in the corridor aren't set correctly.
Please use the Accept as Solution or Kudo buttons when appropriate
I set the elevation targets to alignments in each region after executing the automatic inrtersection but don't know if I have to set elevations to sidewalk roads or if I have to define something as a target before I execute automatic intersection command.
Anyhow I follow the automatic section drawing and nothing else, but no matter what I do quadrant sidewalks allways appear lower than roads sidewalks.
OK.. Here is the compressed drawing.
I have eliminated lots of things and reduced as much as I could.
I Hope it helps...
For a much easier approach I post the drawing focussing the view of the difference in level between main roads and intersection.
I don't understand what's the problem with the way I created the assembly.
I have tried with curb assemblies took directly fron the program and the same thing happens.
Some of your subassemblies have been moved after they were attached to the assembly. Select them. right-click and clear the offset. You should see them snap back to the correct location, relative to the assembly.