AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
phareouh
Posts: 29
Registered: ‎07-15-2011
Message 1 of 2 (215 Views)
Accepted Solution

Assembly Overlap , When Assigning Targets for median in corridor

215 Views, 1 Replies
07-09-2012 08:48 PM

Dear All 

Here's my assembly :

asss.JPG

 

and 

 

when I tried to assign the Median Width in my corridor to a polyline representing media width,

 

I got this overlap in my Section view :

 

OverLab.JPG

 

overLab2.JPG

 

so how can I maintain Objects in this cause "Lanes" attached to median no matter width change ?

 

Thanks

Yeah Will Not that much :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated

Most likely what happened is you attached the lane accidentally to the assembly baseline and not the median. You then moved the lane subassembly to the correct location. When you do that, it's still attached to whatever it was originally attached to but now with an offset. Grab your lane (and everything left of it for the left side) and on the ribbon choose the command MOVE. Don't use the AutoCAD MOVE, COPY, or MIRROR command unless you don't want to change what the subassembly is attached to.

 

http://screencast.com/t/W08ZOH2oMC 

*Expert Elite*
BrianHailey
Posts: 2,819
Registered: ‎04-27-2005
Message 2 of 2 (195 Views)

Re: Assembly Overlap , When Assigning Targets for median in corridor

07-10-2012 05:49 AM in reply to: phareouh

Most likely what happened is you attached the lane accidentally to the assembly baseline and not the median. You then moved the lane subassembly to the correct location. When you do that, it's still attached to whatever it was originally attached to but now with an offset. Grab your lane (and everything left of it for the left side) and on the ribbon choose the command MOVE. Don't use the AutoCAD MOVE, COPY, or MIRROR command unless you don't want to change what the subassembly is attached to.

 

http://screencast.com/t/W08ZOH2oMC 

Brian Hailey
CAD-1.com
My Blog
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.