AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
4 Posts
0 Kudos
Registered: ‎01-21-2013
Post 1 of 4
Accepted Solution

Assembly not showing in cross sections

1358 Views, 3 Replies
01-21-2013 07:39 AM

I have everything needed for plotting of cross sections. Alignment, profile, assembly....

 

The "Corridor Section Editor" shows everything as it should be. Existing Ground, Final Grade, Labeling, etc...

 

When "Create Multiple Views" or "Create Section View" only existing Ground shows. All layers are on...

 

Any ideas..

 

Thanks

Have you sampled the corridor?  Under group properties, the sections tab has a 'sample more sources' button (top right had corner) open it up and you will be able to add or remove objects to your section views.

Member
4 Posts
0 Kudos
Registered: ‎01-21-2013
Post 2 of 4

Re: Assembly not showing in cross sections

01-21-2013 07:40 AM in reply to: audave

BTW When plotting sections, in the "Section Display Option"  Existing ground is the  only thing showing, what am I missing, Thanks

Active Member
7 Posts
1 Kudo
Registered: ‎06-08-2010
Post 3 of 4

Re: Assembly not showing in cross sections

01-21-2013 10:12 AM in reply to: audave

Have you sampled the corridor?  Under group properties, the sections tab has a 'sample more sources' button (top right had corner) open it up and you will be able to add or remove objects to your section views.

Member
4 Posts
0 Kudos
Registered: ‎01-21-2013
Post 4 of 4

Re: Assembly not showing in cross sections

01-21-2013 10:57 AM in reply to: Wanita17

That was it! Something simple as usual!!

 

Thanks!!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!