AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Mentor
470 Posts
3 Kudos
Registered: ‎12-10-2003
Post 1 of 3

Assemblies and corridors

184 Views, 2 Replies
12-28-2012 12:50 PM

Okay all, here is my next question.  I have a proposed road with a varying curb line.  There is a minimum 5 foot tree lawn between the back of curb and sidewalk.  I have used a lane transition and attached it to an alignment to get the curb to follow.  Also used the urban sidewalk with buffer widths.  How do I connect the back of curb to the sidewalk and keep the sidewalk in the same offset from the baseline.  In the attachment, I have used a zero inside boulevard width and slide the sidewalk over from the curb line in my assembly.  Will this work?

 

Happy new year all

*Expert Elite*
4,613 Posts
916 Kudos
Registered: ‎07-22-2003
Post 2 of 3

Re: Assemblies and corridors

12-28-2012 01:35 PM in reply to: trynders

That would work, except you lose the Top codes connection and may confuse a surface build. I use a polyline at the edge of sidewalk and assign that as a horizontal target for the inside edge of the sidewalk.

Jeff_M, also a frequent Swamper
*Pro
1,182 Posts
180 Kudos
Registered: ‎01-07-2011
Post 3 of 3

Re: Assemblies and corridors

12-28-2012 03:38 PM in reply to: trynders

I would use an Offset Alignment as the Target.

 

It's quick to Create and will dynamically follow the baseline at the offset distance should the baseline have to move around.

Fred Ernst, PE
C3D 2015 SP2
Ernst Engineering
www.ernstengineering.com
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!