Community
I'm looking for opinions on whether this Dell optiplex 9020 will run Civil 3D 2014, shall I say, reasonably or fairly well. I know it's not going to be the best. But we've been offered them on a take it or leave it basis. The only change I'll be allowed to make is more RAM. So it will have at least 16GB. I know this exceeds the min. specs. for the program. I also know that those specs. are only good enough to open the program and do the tutorials.
So I really need to know if there is any reason this just wont work. I can't get a different model, I can't add a better video card or a SSD. We either take these as replacement for our Dell Precision T690s & T720s running XP or we don't get the upgrades. I have to say yes or no. If I say yes then I can't come back and say oops we really can't use them. They're not the most expensive machines in the world but we'd be getting 6. So it's a bit of an investment.
My opinion is that they will run C3D 2014 reasonably well unless it's a fairly large project.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Thank you. It looks like our best course is to try it and see. At least we'll dump XP.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.
Post to forums
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")