Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Is there a way to have annotative text that is set to "Match Text Orientation to Layout" that can be on any angle other than 0 degrees...
ie, I want to put a piece of text on a 45 degree angle on one view, however when the view changes have the text retain the original angle while flipping the text as necessary so that it's legible.
Why not just use the General Text in Civil3D? There seems to be a conflict
in Civil3D with the new Annotative Text. Just my opinion!
Bill
wrote in message news:5588336@discussion.autodesk.com...
Is there a way to have annotative text that is set to "Match Text
Orientation to Layout" that can be on any angle other than 0 degrees...
ie, I want to put a piece of text on a 45 degree angle on one view, however
when the view changes have the text retain the original angle while flipping
the text as necessary so that it's legible.
Is there a known issue with the annotative text in Civil 3D? We have been using it in Civil 3D lately and have a had a couple of corrupt drawings. Is there any correlation between the two?
All I know is that I was trying out the NEW annotations and realized I was
in the wrong file. I copied -> paste to another drawing and things went
WHACKO. I quit and am waiting for better information.
Bill
wrote in message news:5588504@discussion.autodesk.com...
Is there a known issue with the annotative text in Civil 3D? We have been
using it in Civil 3D lately and have a had a couple of corrupt drawings. Is
there any correlation between the two?
General Notes doesn't accomplish what I'm trying to do unless I create a separate style for each angle that I wish to place the text. I'm labeling buildings on arbitrary angels and would like to maintain the angle of the text, however if the view changes then flip the text 180 degrees so that it's legible.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")