AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
asloat
Posts: 79
Registered: ‎06-07-2011
Message 1 of 3 (144 Views)

Annotative alignment stationing not independent when moved

144 Views, 2 Replies
12-20-2012 09:09 AM

I have a user with an alignment that has the stationing labels in 20 and 60 scales annotative. He needs to move one of the 60 scale labels because at that scale it overlaps another label nearbye. However when he makes the 60 scale the active scale and selects the label and moves it with a grip like normal, it also modifies the positioning of the 20 scale label. Not sure if it matters, but unlike normal annotative text, it does not shadow the other scales when he selects it, though that might be an independent setting.

*Expert Elite*
tcorey
Posts: 2,618
Registered: ‎12-18-2002
Message 2 of 3 (138 Views)

Re: Annotative alignment stationing not independent when moved

12-20-2012 09:49 AM in reply to: asloat

Civil 3D labels do not include the ability to be moved independently at different scales. That would be a nice feature, but it's just not possible at this point in time.

 

Best regards,

 

Tim

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
*Pro
dgordon
Posts: 1,474
Registered: ‎12-14-2006
Message 3 of 3 (130 Views)

Re: Annotative alignment stationing not independent when moved

12-20-2012 11:03 AM in reply to: asloat

in order to have different label positions at different scales it is necessary to make a seperate label for each scale and put them on different layers and turn them on/off in their respective viewports.

 

 

Dan

Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
www.preinnewhof.com
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.