AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Mentor
trynders
Posts: 470
Registered: ‎12-10-2003
Message 1 of 9 (467 Views)

Alley Corridor

467 Views, 8 Replies
12-26-2012 09:23 AM

Hi All,

What's the best way to model an alley with a 90 degree angle (turn).  Do I treat it as an intersection with a zero radius?  My typ section is 15 feet width with a 4% slope down to the center of pavement.  "V" bottom.  Not sure how to get it to model the outside corner and also eliminate the inside overlay.  Thanks,

*Expert Elite*
tcorey
Posts: 2,721
Registered: ‎12-18-2002
Message 2 of 9 (461 Views)

Re: Alley Corridor

12-26-2012 10:19 AM in reply to: trynders
 
Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
*Expert Elite*
tcorey
Posts: 2,721
Registered: ‎12-18-2002
Message 3 of 9 (452 Views)

Re: Alley Corridor

12-26-2012 10:38 AM in reply to: trynders

I don't know if I would necessarily use the Intersection tools, but I would make a multi-baseline corridor to handle this.

 

If you're not familiar the feature, a Corridor can have multiple alignments defined as Baselines. Each will have its own design profile and assembly.

 

See the attached simple corridor with 90 degree corner.

 

 

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
*Pro
fcernst
Posts: 1,142
Registered: ‎01-07-2011
Message 4 of 9 (408 Views)

Re: Alley Corridor

12-26-2012 06:58 PM in reply to: tcorey

I don't see the advantage of using a multi-baseline Corridor?

 

One baseline, and you would not have to monitor and update the common PVI across two profiles.

Fred Ernst, PE
C3D 2015
Ernst Engineering
www.ernstengineering.com
Mentor
trynders
Posts: 470
Registered: ‎12-10-2003
Message 5 of 9 (391 Views)

Re: Alley Corridor

12-27-2012 05:47 AM in reply to: trynders

Thanks tcorey,

I was going to take a look see but im using 2012 and apparently you attached a newer version.  Sad day.

Distinguished Mentor
andrewpuller3811
Posts: 787
Registered: ‎07-30-2008
Message 6 of 9 (353 Views)

Re: Alley Corridor

12-29-2012 03:44 AM in reply to: trynders

Here is a blog post of mine covering this

 

http://andrewscivil3dstuff.blogspot.com.au/2011/06/create-corridor-with-90-degree-bend.html

 

and a similar topic with sample drawing is here

 

http://forums.autodesk.com/t5/AutoCAD-Civil-3D/Intersection-Design-90-degree-turn/m-p/3012576

 

 

If this fixed your issue, click on "Accept as Solution"

Andrew Puller
Maitland, NSW, Australia
Windows 7 Enterprise 64bit
Intel core i7 2600 @ 3.40 GHz with 16GB Ram
Civil 3d 2013 64bit
*Pro
fcernst
Posts: 1,142
Registered: ‎01-07-2011
Message 7 of 9 (336 Views)

Re: Alley Corridor

12-29-2012 03:50 PM in reply to: andrewpuller3811

Good show mate!  Let's kick it up a notch..   A mitered interior corner cleanup for the intersection:

 

One corridor, one assembly, one profile...fully dynamic.

 

 

Capture.JPG

 

 

 

ddCapture2.JPG

Fred Ernst, PE
C3D 2015
Ernst Engineering
www.ernstengineering.com
*Expert Elite*
BrianHailey
Posts: 2,850
Registered: ‎04-27-2005
Message 8 of 9 (309 Views)

Re: Alley Corridor

12-30-2012 05:00 PM in reply to: fcernst

Care to share the drawing Fred? I would love to see your approach to this. I think I know how you did it but I'm not positive.

Brian Hailey
CAD-1.com
My Blog
*Expert Elite*
tcorey
Posts: 2,721
Registered: ‎12-18-2002
Message 9 of 9 (288 Views)

Re: Alley Corridor

12-31-2012 09:01 AM in reply to: fcernst

I like Fred's result as he is able to include cross secitons in the mitered area. Do you care to expound?

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!