AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
DannyCounts
Posts: 31
Registered: ‎10-08-2003
Message 1 of 2 (137 Views)

Alignment Tags & Alignment Tables

137 Views, 1 Replies
12-07-2004 05:13 PM
Is it possible to tag alignments and then put the bearing/distance data and curve data in an alignment table?
*Daniel Philbrick
Message 2 of 2 (137 Views)

Re: Alignment Tags & Alignment Tables

12-08-2004 10:53 AM in reply to: DannyCounts
Yes. The label style has a component for the Table Tag. On the general tab of the label style, you can choose whether to display the label as a Tag or a Label. If you select tag for the Display Mode, the tag is used as an index into the table. You can also select the label directly, and Civil 3D will create a child style with the Display Mode switched to Tag. You then need to create a table style which has the appropriate properties fields in the table. There are a few table styles in the content we ship. There are 4 types of tables: Line, Curve, Spiral and Segment. The Segment table is a combo table which supports combinations of Lines, Curves and Spiral entities. Dan Philbrick Autodesk, Inc. "DannyCounts" wrote in message news:13763319.1102468440394.JavaMail.jive@jiveforum2.autodesk.com... > Is it possible to tag alignments and then put the bearing/distance data and curve data in an alignment table?
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.