Alignment Lables Not Displaying AutoCAD Civil 3D 2013

[runnerman847]

The major and minor station alignment labels keep disappearing in my drawing.  I've had some luck by removing and re-adding the labels but this has stopped working.  Is this an issue that will be resolved by Service Pack 1?

[Lisa_Pohlmeyer]

SP1 is already out, if that's what you're asking.  I haven't seen that issue.  Is your alignment "live" or a Dref?

[AllenJessup]

There is a thread about disappearing Profile Labels. The workaround was to lock the Label layer immediately after creating. See if that helps with your alignment labels.

[troma]

I have certain alignment labels set to use an expression to set the text height.  When I set the refference station (my 1+000 location) at an even multiple of 5 from the start of the alignment  (ie the start point of the alignment is an even staion like 0+975) these staion labels don't display.  My workaround is to start the alignment at something like 0+974.52.  I generally turn off the labels prior to 1+000 anyway, so that part doesn't matter.