AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
hamid.akbari
Posts: 87
Registered: ‎05-28-2013
Message 1 of 9 (223 Views)
Accepted Solution

Alignment label direction

223 Views, 8 Replies
01-14-2014 08:12 AM

Hi

after creating an alignment I don't know why the station labels directions are different?

Thanks for your help in advamce.

 

OK, as I said, this is controlled by the LabelStyle's Plan Readability setting.

 

1-14-2014 10-07-30 AM.png

*Expert Elite*
Jeff_M
Posts: 4,431
Registered: ‎07-22-2003
Message 2 of 9 (217 Views)

Re: Alignment label direction

01-14-2014 08:41 AM in reply to: hamid.akbari
This is controlled by the Plan Readability properties in the Label Style
Jeff_M, also a frequent Swamper
Valued Contributor
hamid.akbari
Posts: 87
Registered: ‎05-28-2013
Message 3 of 9 (214 Views)

Re: Alignment label direction

01-14-2014 08:51 AM in reply to: Jeff_M
Thanks for your respond,
But it dosen't wrok.
*Expert Elite*
Jeff_M
Posts: 4,431
Registered: ‎07-22-2003
Message 4 of 9 (206 Views)

Re: Alignment label direction

01-14-2014 09:40 AM in reply to: hamid.akbari

Sure it does. In the following image the label style for the top alignment has the Plan Readability set to True. The bottom one uses a style which has this set to false.

1-14-2014 9-37-16 AM.png

Jeff_M, also a frequent Swamper
Valued Contributor
hamid.akbari
Posts: 87
Registered: ‎05-28-2013
Message 5 of 9 (204 Views)

Re: Alignment label direction

01-14-2014 09:49 AM in reply to: Jeff_M
Yes ,It's correct ,but regarding to my question,I have only one alignment!
I think thin is because of direction of priliminary polyline that ,some poly lines drew right to left and other drew left to right.
by the way, this method didn't work for me.
I appreciate you for your consideration.
Thanks
Hamid
*Expert Elite*
Jeff_M
Posts: 4,431
Registered: ‎07-22-2003
Message 6 of 9 (200 Views)

Re: Alignment label direction

01-14-2014 09:55 AM in reply to: hamid.akbari

Can you post your drawing and let us know which version of C3D you are using?

Jeff_M, also a frequent Swamper
Valued Contributor
hamid.akbari
Posts: 87
Registered: ‎05-28-2013
Message 7 of 9 (192 Views)

Re: Alignment label direction

01-14-2014 10:03 AM in reply to: hamid.akbari

I work with Civil3D-2013.

*Expert Elite*
Jeff_M
Posts: 4,431
Registered: ‎07-22-2003
Message 8 of 9 (188 Views)

Re: Alignment label direction

01-14-2014 10:08 AM in reply to: hamid.akbari

OK, as I said, this is controlled by the LabelStyle's Plan Readability setting.

 

1-14-2014 10-07-30 AM.png

Jeff_M, also a frequent Swamper
Valued Contributor
hamid.akbari
Posts: 87
Registered: ‎05-28-2013
Message 9 of 9 (181 Views)

Re: Alignment label direction

01-14-2014 10:12 AM in reply to: Jeff_M
I appreciate you for your help.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.