Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I converted a Land Desktop drawings into a Civil 3D drawing yesterday.
When I came in this morning and opened the drawing, it had a ton of these strange boxes showing up all over the place.
They have dashed lines, includes the words AeccDbContour (LAN_AECCBASE)
anyone else seen these and how to deal with them?
thanks
I know this is an old thread/question/problem but I am running into this same problem as the original poster and no one ever responded to him. I'm running Civil 3D 2010. I've attached an image of the box shapes that were originally contour lines. This has now occurred in two of my projects that were originally started in LDT 2006.
Thanks for your time.
Bryan
Bryan Collins Cadd Technician Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB Civil 3D 2013
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")