AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
60 Posts
1 Kudo
Registered: ‎07-12-2012
Post 1 of 5
Accepted Solution

ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

379 Views, 4 Replies
10-29-2012 12:29 PM

I need to add a turnout (not intersection) along a bike path at a given station (see pdf attachment)

if I draw a turnout with nice arcs and lines, is there a way to add it to the corridor with extended

cross slope from the assembly at that point?

 

Thanks

 

John Wilson

yes, it's possible.

You have to use a BasicLaneTransition.

Please use help for better explainance.

Good luck.

Thank you very much. It helped to research edit target to a polyline layout

 

John

While polylines can be used as targets they are static entities, so they don't move if your alignment changes. A better solution is to use offset alignments with widenings. Then you can move the widening along the baseline or edit it parametrically. You want a solution that is dynamic to changes to the design.

 

Also for a widening you should consider using an offset in your assembly so that your template will be perpendicular to the edge of pavement through the widening.

Valued Contributor
71 Posts
4 Kudos
Registered: ‎03-23-2007
Post 2 of 5

Re: ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

10-29-2012 12:55 PM in reply to: johnwilson0805

yes, it's possible.

You have to use a BasicLaneTransition.

Please use help for better explainance.

Good luck.

Valued Contributor
60 Posts
1 Kudo
Registered: ‎07-12-2012
Post 3 of 5

Re: ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

10-29-2012 04:48 PM in reply to: bpoleuca

Thank you very much. It helped to research edit target to a polyline layout

 

John

*Expert Elite*
2,369 Posts
199 Kudos
Registered: ‎09-04-2006
Post 4 of 5

Re: ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

10-29-2012 11:45 PM in reply to: johnwilson0805

While polylines can be used as targets they are static entities, so they don't move if your alignment changes. A better solution is to use offset alignments with widenings. Then you can move the widening along the baseline or edit it parametrically. You want a solution that is dynamic to changes to the design.

 

Also for a widening you should consider using an offset in your assembly so that your template will be perpendicular to the edge of pavement through the widening.

Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
http://www.sec-landmgt.com
Valued Contributor
60 Posts
1 Kudo
Registered: ‎07-12-2012
Post 5 of 5

Re: ADD A TURN OUT ALONG A BIKE PATH CORRIDOR

10-31-2012 06:47 AM in reply to: Neilw

Thanks Neil

 

I'll look imto that

 

John

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!