AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Pro
fcernst
Posts: 1,162
Registered: ‎01-07-2011
Message 1 of 5 (294 Views)
Accepted Solution

2013 - General Segment Grade Text Component Not Updating

294 Views, 4 Replies
10-29-2012 03:12 PM

I extracted a dynamic feature line from the gutter flowline of my Corridor. I labeled Multiple Segments for the feature line with a grade and vertex style that uses the  "General Segment Grade" text component.

 

I am overiding lane cross slopes in the Section Editior and the segment grade labels for the extracted feature line do not update after I Update Corridor in the Section Editior. 

 

If I raise/lower the CL profile of the corridor, the label updates. Just not reacting to these Corridor edits.

 

Peculiar behavior: The label will update to reflect the Corridor update if I Isolate it.

 

 

 

 

 

 

Capture.JPG

Fred Ernst, PE
C3D 2015 SP2
Ernst Engineering
www.ernstengineering.com

Hi Tim,

 

I've isolated this to the Update Corridor command within the Section Editor. The Update Corridor command is rebuilding the corridor, updating the surface, updating the Section View, etc., like it should, however the feature line labeling is not updating on this extracted dynamic feature line.

 

If I then select the Corridor and Rebuild it from the command on the Corridor tab, the labels update.

 

 

 

 

*Expert Elite*
tcorey
Posts: 2,765
Registered: ‎12-18-2002
Message 2 of 5 (281 Views)

Re: 2013 - General Segment Grade Text Component Not Updating

10-29-2012 04:40 PM in reply to: fcernst

Fred, just fyi, this works correctly in 2013.

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
*Pro
fcernst
Posts: 1,162
Registered: ‎01-07-2011
Message 3 of 5 (279 Views)

Re: 2013 - General Segment Grade Text Component Not Updating

10-29-2012 04:42 PM in reply to: tcorey

It's not working for me in 2013. It's behaving as I describe.

Fred Ernst, PE
C3D 2015 SP2
Ernst Engineering
www.ernstengineering.com
*Pro
fcernst
Posts: 1,162
Registered: ‎01-07-2011
Message 4 of 5 (257 Views)

Re: 2013 - General Segment Grade Text Component Not Updating

10-30-2012 12:46 PM in reply to: tcorey

Hi Tim,

 

I've isolated this to the Update Corridor command within the Section Editor. The Update Corridor command is rebuilding the corridor, updating the surface, updating the Section View, etc., like it should, however the feature line labeling is not updating on this extracted dynamic feature line.

 

If I then select the Corridor and Rebuild it from the command on the Corridor tab, the labels update.

 

 

 

 

Fred Ernst, PE
C3D 2015 SP2
Ernst Engineering
www.ernstengineering.com
*Expert Elite*
tcorey
Posts: 2,765
Registered: ‎12-18-2002
Message 5 of 5 (249 Views)

Re: 2013 - General Segment Grade Text Component Not Updating

10-30-2012 02:22 PM in reply to: fcernst

Thanks for the follow-up. That's good to know. I'll file that in my (short-term?) memory.

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.