AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
sboon
Posts: 2,145
Registered: ‎11-08-2005
Message 1 of 15 (1,154 Views)

2013 bug - corridor feature lines

1154 Views, 14 Replies
04-17-2012 11:00 AM

I have a road corridor with feature lines connecting the road edges (cyan), ditchline (dark green), daylight_cut (yellow), daylight_fill (green) and daylight (white).  At certain random locations along this corridor I am getting feature lines which span from one station to another, ignoring all of the corridor sections in between.  The image below shows a daylight_fill line spanning over 60m, even though there is a daylight line through this region.

 

Clipboard01.png

 

In this area a ditch line and a daylight_cut start at 4+110, skip over the next cut section at 4+120 and jump over a hundred meters to the next piece of ditch at 4+280

 

Clipboard02.png

 

This corridor builds clean - no error messages reported.  Is anybody else seeing this behaviour?

Employee
dana.probert
Posts: 1,261
Registered: ‎04-19-2006
Message 2 of 15 (1,140 Views)

Re: 2013 bug - corridor feature lines

04-17-2012 01:00 PM in reply to: sboon

Can you post the dwg? or a sample dwg?

Dana Probert, P.E.
Technical Marketing Manager, Civil Engineering
Autodesk
Blog: BIM on the Rocks
Learn More About BIM for Infrastructure
*Expert Elite*
sboon
Posts: 2,145
Registered: ‎11-08-2005
Message 3 of 15 (1,131 Views)

Re: 2013 bug - corridor feature lines

04-17-2012 01:23 PM in reply to: dana.probert

Not on a public board Dana, but PM me and I'll arrange to get it to you somehow.

Employee
dana.probert
Posts: 1,261
Registered: ‎04-19-2006
Message 4 of 15 (1,080 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:17 AM in reply to: sboon

Can you make it fail in a tutorial or sample dwg?

 

You can email me the dwg if you like and I can see if I can get it looked at. First dot last at youknowwhere.com

Dana Probert, P.E.
Technical Marketing Manager, Civil Engineering
Autodesk
Blog: BIM on the Rocks
Learn More About BIM for Infrastructure
Distinguished Contributor
bigblittlerent
Posts: 260
Registered: ‎03-26-2008
Message 5 of 15 (1,067 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:43 AM in reply to: sboon

In the Feature Lines tab of corridor properties...Does Branching Inward or Outward make a difference?

 

Brent

*Expert Elite*
sboon
Posts: 2,145
Registered: ‎11-08-2005
Message 6 of 15 (1,063 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:55 AM in reply to: bigblittlerent

Nope.

Employee
dana.probert
Posts: 1,261
Registered: ‎04-19-2006
Message 7 of 15 (1,060 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:57 AM in reply to: sboon

I know that you have probably checked this... but just looking at your screen capture, I have to ask.

 

Is there a corridor surface in your dwg with the border only display on?

Dana Probert, P.E.
Technical Marketing Manager, Civil Engineering
Autodesk
Blog: BIM on the Rocks
Learn More About BIM for Infrastructure
Distinguished Contributor
bigblittlerent
Posts: 260
Registered: ‎03-26-2008
Message 8 of 15 (1,059 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 11:57 AM in reply to: sboon

Steve,

 

To answer your previous question...Yes, I saw this a few times...branching outward solved it for me a couple times.

 

Good luck.

 

Brent

*Expert Elite*
sboon
Posts: 2,145
Registered: ‎11-08-2005
Message 9 of 15 (1,055 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 12:08 PM in reply to: dana.probert

No surface Dana.  The green lines are Daylight_Fill feature lines, the yellow ones are Daylight_Cut, and the white ones are Daylight codes.  The darker green ones parallel to the Daylight_Cut  are the Ditch codes.

Distinguished Contributor
bigblittlerent
Posts: 260
Registered: ‎03-26-2008
Message 10 of 15 (1,050 Views)

Re: 2013 bug - corridor feature lines

04-19-2012 12:16 PM in reply to: sboon

Steve,

 

Was the assembly built in 2013?...have had problems mixing subassemblies from different versions of software.

 

Brent

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.