AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
New Member
khalilwilson1064
Posts: 1
Registered: ‎10-03-2012
Message 1 of 2 (234 Views)

2012 Civil 3D Slow Crosshairs. -- Please help

234 Views, 1 Replies
10-03-2012 04:42 PM

Ok..Question. Our company has moved from workstations to Pano (Virtual Desktops) no computer at desk. We installed 2012 Civil 3D. Files open and close ok, but crosshairs are slow or lag. Also mtext is painful slow. Suggestions we have tried include: Changing Windows 7 to Classic, Turn off bitlocker, trun off selectioncycle, turn off dynamic inputs, unloading Ribbon with no improvement

 

I have attempted to adjust (turn on) the 3d acceleration, but as you would expect "Crash" since Civil 3D is running on the server and piped through the network to the Pano box, there is no graphics card at each computer. Attached are the specs for what I can see as my virtual desktop.

 

Question is without 3D acceleration are we out of luck, or is it possible to allocate more graphic resources via software?

Thanks

 

*Expert Elite*
Joe-Bouza
Posts: 5,044
Registered: ‎12-15-2008
Message 2 of 2 (231 Views)

Re: 2012 Civil 3D Slow Crosshairs. -- Please help

10-03-2012 04:51 PM in reply to: khalilwilson1064

Check the KB there is a Performance hotfix for 2012 specifically related to cross hair lag

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.