Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

2012 Civil 3D Slow Crosshairs. -- Please help

1 REPLY 1
Reply
Message 1 of 2
khalilwilson1064
341 Views, 1 Reply

2012 Civil 3D Slow Crosshairs. -- Please help

Ok..Question. Our company has moved from workstations to Pano (Virtual Desktops) no computer at desk. We installed 2012 Civil 3D. Files open and close ok, but crosshairs are slow or lag. Also mtext is painful slow. Suggestions we have tried include: Changing Windows 7 to Classic, Turn off bitlocker, trun off selectioncycle, turn off dynamic inputs, unloading Ribbon with no improvement

 

I have attempted to adjust (turn on) the 3d acceleration, but as you would expect "Crash" since Civil 3D is running on the server and piped through the network to the Pano box, there is no graphics card at each computer. Attached are the specs for what I can see as my virtual desktop.

 

Question is without 3D acceleration are we out of luck, or is it possible to allocate more graphic resources via software?

Thanks

 

1 REPLY 1
Message 2 of 2

Check the KB there is a Performance hotfix for 2012 specifically related to cross hair lag

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report