AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
Sinc
Posts: 6,207
Registered: ‎11-18-2006
Message 1 of 4 (318 Views)
Accepted Solution

2011 Can't move MTEXT... Cursor gets locked in "mystery viewport"

318 Views, 3 Replies
01-12-2012 08:58 AM

I really hope someone else has experienced this, and knows a way to fix it...

 

Whenever I try to move MTEXT in paperspace (C3D 2011), a tiny little box (viewport?) appears in the upper-left of the screen, and the cursor gets locked into it.  It makes it impossible to do anything until I shut down and restart C3D.  But then the next time I try to move MTEXT, the same thing happens again.

 

It's brought my work to a complete standstill.  I can't do ANYTHING.  It's ultra-extremely-frustrating.

 

Here's a screenshot:

 

MTEXT_Problem.png

Sinc

Update:  This problem only seemed to happen with one particular block of MTEXT.  I deleted and recreated it, and I can move the new MTEXT block normally.

 

I have no explanation.  (And yes, I tried running AUDIT and all that stuff.)  It just seems to be YA2011P (yet another 2011 problem).  We probably really need to move up to 2012...  2011 seems to be as really bad release, as far as quality and usability.

*Expert Elite*
Sinc
Posts: 6,207
Registered: ‎11-18-2006
Message 2 of 4 (314 Views)

Re: 2011 Can't move MTEXT... Cursor gets locked in "mystery viewport"

01-12-2012 09:10 AM in reply to: Sinc

Update:  This problem only seemed to happen with one particular block of MTEXT.  I deleted and recreated it, and I can move the new MTEXT block normally.

 

I have no explanation.  (And yes, I tried running AUDIT and all that stuff.)  It just seems to be YA2011P (yet another 2011 problem).  We probably really need to move up to 2012...  2011 seems to be as really bad release, as far as quality and usability.

Sinc
Member
biljana7
Posts: 5
Registered: ‎01-13-2012
Message 3 of 4 (283 Views)

Re: 2011 Can't move MTEXT... Cursor gets locked in "mystery viewport"

01-13-2012 07:01 AM in reply to: Sinc

I have exaclty the same problem. Cannot move, edit or delete mtext!!

Member
biljana7
Posts: 5
Registered: ‎01-13-2012
Message 4 of 4 (282 Views)

Re: 2011 Can't move MTEXT... Cursor gets locked in "mystery viewport"

01-13-2012 07:02 AM in reply to: biljana7

I forgot to mention that I have 2012 version of Civil 3D.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.